联系方式
Contact
13120453657
13120453657
Alice.q@leagrid.com

5.8G Base Station Equipment LGS2000-F-BS-01

LGS2000-F-BS-01 is independently developed by Beijing Leagrid Technology Co., Ltd.

日期 : 2023-02-03
Date : 2023-02-03

    LGS2000-F-BS-01

    5.8G Base Station Equipment

    Product Overview

    LGS2000-F-BS-01 is independently developed by Beijing Leagrid Technology Co., Ltd.  and supports ≥20MHz air port bandwidth. Support 5150M-5850MHz band adjustable, can be used for regional wireless communication network construction, for wireless transmission in the coverage area. Dual-stream service provides high bandwidth and low latency wireless transmission service with perfect service support capability, high reliability, high security, easy network deployment, automatic on-line and configuration, etc. High reliable protection level, easy to set up LAN for indoor and outdoor occasions.

     

    Technical Specification

    Wireless protocol: Private protocol
    Wireless frequency band: 5725M-5850MHz
    Channel bandwidth: 20Mhz/40Mhz/80Mhz
    Transmit power: ≤33db
    Transmission delay: less than 20ms
    Uplink bandwidth: 1Gbps
    Downlink bandwidth: 1Gbps

    Transmit power.
        20Mhz bandwidth:MCS7 23±2DB, MCS0 26±2DB.
        40Mhz bandwidth: MCS7 23±2DB, MCS0 26±2DB.
        80Mhz bandwidth: MCS9 21±2DB, MCS0 24±2DB.
    Acceptance sensitivity.
        20Mhz bandwidth: -70dbm@MCS7, -90dbm@MCS0 .
        40Mhz bandwidth: -66dbm@MCS7, -90dbm@MCS0 .
        80Mhz bandwidth: -60dbm@MCS9, -86dbm@MCS0 .
    EVM: ≤ -28 DB
    Frequency bias (ppm): ±20ppm

    Transmission mode: conventional mode & low latency high bandwidth mode
    Roaming delay: <100ms
    Auto-online: automatic connection when device is powered on, no need to set
    Easy to deploy.
    Long transmission distance, wide coverage, 1-to-many capability can reach more than 20 video channels
    Management Software
    Zero Touch configure, automatic device go-live
    Automatic and intelligent RF performance optimization for various application scenarios
    Support manual adjustment and configuration of RF parameters for various application scenarios
       Support to specify any antenna (1~4) to send and receive data
       Support setting the available channel list for automatic channel selection algorithm
       Support to modify the minimum channel emphasis threshold for allowing client access
       Can set the sending rate of multicast service
       RTS/CTS protection policy during data transmission
       Data rate MCS0~MCS11
       Support to enable or disable LDPC
       Support to enable or disable STBC
       Support to enable or disable OFDMA
       Support to enable or disable Multi-User MIMO
       Support to modify the maximum length of MPDU and MSDU service aggregation (32,64,128,256)
    Management and maintenance
       View the number of connected terminals, link status, and the working status of the system
       Firmware remote upgrade
    Security
    CPEID hiding
    Wireless encryption
    Two-factor access authentication (password + security chip)

    External antenna
    Type: 1: Directional flat antenna
          2: Omni-directional fiberglass antenna
    Gain: 11dB±1db

    Interface
    (1) 1 ground screw
    (2) 1 air permeation hole
    (3) 1 SFP Gigabit optical port
    (4) 1 RJ45 Gigabit electrical port
    (5) Power connector
    (6) 4 5.8G antenna interface

    Environmental conditions
    Operating temperature: -40 to 85°C
    Storage temperature: -40 to 85°C
    Ambient relative humidity: 5 to 95% (non-condensing)

    Product Dimensions
    223mm(L) X 133mm(W) X 316mm(H)
    Weight
    3.1kg
    Industry Standards
    Electromagnetic Interference.
    FCC CFR47 Part 15, EN55022/CISPR22, Class A
    EMS.
    IEC61000-4-2 (ESD): ±8kV (contact), ±15kV (air)
    IEC61000-4-3 (RS): 10V/m (80MHz-2GHz)
    IEC61000-4-4 (EFT): Power port: ±4kV; Data port: ±2kV
    IEC61000-4-5 (Surge). Power port: ±2kV/DM, ±4kV/CM; Data port: ±2kV
    IEC61000-4-6 (CS): 3V (10kHz-150kHz); 10V (150kHz-80MHz)
    IEC61000-4-16 (Common mode conduction). 30V (continuous), 300V (1s)

    Mechanical Standards
    IEC60068-2-6 (Vibration)
    IEC60068-2-27 (Shock)
    IEC60068-2-32 (Free fall)

    Warranty 
    3 years


    Power supply
    100-240vac 0.5a
    Full load power consumption
    <30W
     

    Topology diagram

     

    Machanical Drawing

    Download

    Datasheet: LGS2000-F-BS-01.pdf