LGS2000-F-4FE1FX-I
4-port unmanaged DIN-Rail switches
LGS2000-F-4FE1FX-I is one of Leagrid green low power optical transceiver series which can be deployed in many industrial scenarios including but not limited to smart city, wind power, grid distribution, oil & gas networking and many other industrial applications. It supports 4 x 10/100Mbase-TX copper ports and 1 x 100Base-FX pluggable fiber port. The maximum power consumption is lower than 2W, IP40 design and EMC level 4 can effectively resist the interference of static,lightning and pulses,strong vibration-resistent mounting clip for DIN-Rail installation, operating temperature range from -40°C to 85°C.
Standard IEEE 802.3i 10Base-T IEEE 802.3u 100Base-Tx 100Base-Fx Switch Properties MAC Table: 1K Packet Buffer: 448K Packet Forwarding Rate: 0.744Mpps Switching Delay: <5us Interface Fiber Ports: 1 100Base-Fx (FC/SC/ST optional) RJ45 Ports: 4 10/100Base-Tx RJ45 ports LED Power LED: PWR Interface LED: RJ45 (Link&ACT) Fiber: F (Link&ACT) Power Requirements Power Terminal: 5-pin 3.81mm-spacing plug-interminal block Full load power consumption: 4port RJ-45+1 port Fiber < 2W |
Overload Protection: Support Reverse Connection Protection: Support Redundancy Protection: Support Physical Characteristics Housing: Metal, fanless Protection Class: IP40 Dimensions : 30mmx115mmx90mm(W×H×D) Weight: 0.45kg Mounting: DIN-Rail or Panel mounting Industry Standard EMI: FCC CFR47 Part 15, EN55022/CISPR22, Class A EMS: IEC61000-4-2 (ESD): ±8kV (contact), ±15kV (air) IEC61000-4-3 (RS): 10V/m (80MHz-2GHz) IEC61000-4-4 (EFT): Power Port: ±4kV; Data Port: ±2kV IEC61000-4-5 (Surge): Power Port: ±2kV/DM, ±4kV/CM; Data Port: ±2kV IEC61000-4-6 (CS): 3V (10kHz-150kHz); 10V (150kHz-80MHz) IEC61000-4-16 (Common mode conduction): 30V (cont.), 300V (1s) |
Machinery: IEC60068-2-6 (Vibration) IEC60068-2-27 (Shock) IEC60068-2-32 (Free Fall) Approvals CE, FCC, RoHS Quality Assurance MTBF: 360,000 hrs Warranty: 3 years Environmental Limits Operating Temperature: -40 to 85°C Storage Temperature: -40 to 85°C Ambient Relative Humidity: 5 to 95% (non-condensing) |
Power Access | 5pin 3.81mm terminals Power Input:12V-36VDC P1&P2 dual redundant power supplies, Support reverse connection protection function |
|
DIN-rail mounting | Panel mounting | |
Ground protection |