LGS2000-F-2FE1FX-I
2-port unmanaged DIN-Rail switches
LGS2000-F-2FE1FX-I is one of Leagrid green low power optical transceiver series which can be deployed in many industrial scenarios including but not limited to smart city, wind power, grid distribution, oil & gas networking and many other industrial applications. It supports 2 x 10/100Mbase-TX copper ports and 1 x 100Base-FX pluggable fiber port. The maximum power consumption is ilower than 2W, IP40 design and EMC level 4 can effectively resist the interference of static,lightning and pulses,strong vibration-resistent mounting clip for DIN-Rail installation, operating temperature range from -40°C to 85°C.
| Standard IEEE 802.3i IEEE 802.3u IEEE 802.3x Switch Properties MAC Table: 2K Packet Buffer: 1M Packet Forwarding Rate: 0.8Mpps Switching Delay: <5us Interface Fiber Ports: 1 100Base-Fx (FC/SC/ST optional) RJ45 Ports: 2 10/100Base-Tx RJ45 ports LED Power LED: P1 P2 Interface LED: RJ45 (Link&ACT) Fiber: F (Link&ACT) Power Requirements Power Terminal: 4-pin 5.08mm-spacing plug-in terminal block Full load power consumption: < 2W |
Overload Protection: Support Reverse Connection Protection: Support Redundancy Protection: Support Physical Characteristics Housing: Metal, fanless Protection Class: IP40 Dimensions : 30mmx84mmx92mm(W×H×D) Weight: 0.25kg Mounting: DIN-Rail or Panel mounting Industry Standard EMI: FCC CFR47 Part 15, EN55022/CISPR22, Class A EMS: IEC61000-4-2 (ESD): ±8kV (contact), ±15kV (air) IEC61000-4-3 (RS): 10V/m (80MHz-2GHz) IEC61000-4-4 (EFT): Power Port: ±4kV; Data Port: ±2kV IEC61000-4-5 (Surge): Power Port: ±2kV/DM, ±4kV/CM; Data Port: ±2kV IEC61000-4-6 (CS): 3V (10kHz-150kHz); 10V (150kHz-80MHz) IEC61000-4-16 (Common mode conduction): 30V (cont.), 300V (1s) |
Machinery: IEC60068-2-6 (Vibration) IEC60068-2-27 (Shock) IEC60068-2-32 (Free Fall) Approvals CE, FCC, RoHS Quality Assurance MTBF: 357,000 hrs Warranty: 3 years Environmental Limits Operating Temperature: -40 to 85°C Storage Temperature: -40 to 85°C Ambient Relative Humidity: 5 to 95% (non-condensing) |
| Power Access |  |
4pin 5.08mm terminals Power Input：12V-36VDC P1&P2 dual redundant power supplies, Support reverse connection protection function |
| DIN-rail mounting |  |
|
| Ground protection |
|
Datasheet： LGS2000-F-2FE1FX-I
